MAIN INFORMATIONS

The ME-SHIFTER F1, an electronic shifting-system for sequential gearboxes, has been designed especially for the karting-sports and therefore it is optimized to your shift kart in regard of function, assembling and handling.
The System is able to shift up or down your gearbox within a time of 60-80 milliseconds by pressing a button. At the same time the ignition is interrupted wherefore you may full-throttle during the shifting process and neednīt get down of the accelerator pedal.
On the average (depends on track, driver and driving conditions) the laptimes can be improved 1-2 seconds (compared to conventional lever-shifting). The gain of time is explained primary by the advantage of having full control of the kart in every situation, because both hands stay at the steering-wheel – everytime !

PLUG & PLAY

The system is compatible to all known 2-stroke shift karts. Applicable to usual chassis-engine-combinations, a standard assembly-kit is available. For the Pushbuttons there is also an optional assembly-kit available.

RACING EVO Version

The ME-SHIFTER F1 Racing Evo is the ideal decision for the ambitious Hobby or Racing Driver, who tries to improve his lap-times significantly or wants a optimum driving comfort. The shifting-times are between 60 and 80 milliseconds. With a fully charged 7,2Ah battery the system will provide about 8.000 shifting sequences.

It is possible to upgrade the ME-SHIFTER F1 Racing Evo to a higher Version at a later time.

HIGHEST QUALITY

Racing parts are special parts. They subject to enormous stress, and thatīs why manufacturers of racing parts often donīt issue a warranty on their products. The ME-SHIFTER F1 is a highly stressed racing part too, the fact that it actuates about 5.000 times on only one racing day is only one example therefore.

For the production of every device are only used quality components of well-known suppliers. The robust connectors allow an IP-protection class of 54 which makes it possible to use the device even at worst weather conditions. Almost every device components are produced with modern cnc-technologies.

TECHNICAL SPECIFICATIONS

Device	ME-SHIFTER F1	Useable lever-force	150 - 200 - 250 N
Voltage supply	12 V	Dimensions of the actuator (L x w x h)	130 x 80 x 50 mm
Nominal current	45 A	Weight of the actuator	995 g
Standby current	16 mA	IP-Protection class	IP 54